Where to locate the screw air compressor?
1. The area must be with enough space and light for operating, maintaining and repairing the screw air compressor.
2. The area must be with low humidity, few dust, fresh air.
3. The ambient temperature should be lower than 40 degress, so that the inlet air to the screw air compressor will not damage the spare parts.
4. If the factory is with much dust, please install a pre-filter system to filtering the dust. Then make sure of the long lifetime of the screw air compressor.
5. In order to avoid the vibration, the foundation of the screw air compressor should be built on hard soil and the foundation water level should be smoothed before installation. If it is installed on the upper floor, anti-vibration measures must be taken. Otherwise, vibration will be transmitted to the downstairs or resonance phenomenon will occur, which will easily cause damage to the air compressor and the building.
6. The air-cooled screw air compressor must pay attention to its near environment. The screw air compressor should not be placed near to the high-temperature machinery or in a poorly-ventilated enclosed space, If it is placed in a closed space, it must be installed with air inlet and exhaust equipment. The air inlet is located at the lower part of the machine room, and the air outlet is located at the upper part of the machine room to facilitate the circulation of cold air. In general, the amount of air entering and leaving the air must be greater than the amount of air discharged from the air compressor.
If you any problem in installing the air compressor, please kindly contact us. We will be there to do service to you at any time.